plumber randwick - drain the tank

For those homeowners who have experienced the convenience that water heaters provide, appreciating the unit goes hand-in-hand with making sure that it keeps running as smooth as possible. Water heaters may be able to last for a considerable amount of time, however, this does not mean that the unit will not be experiencing ample amount of damages. It is not enough that homeowners let the appliance do all the work and forget to make sure that it is adequate to handle such tasks. Of course, regular upkeep on the water storage tank goes a long way. However, if that falls short in keeping the water heater in perfect condition, there are other tips that you can turn to, and reply that they actually work, in keeping the water heater functional. Follow the tips listed below to make sure that the water heating units and devices are kept in pristine shape:

  1. Annually Drain the Tank

Make sure to flush the water tank clean at least once a year. This measure will help homeowners avoid having sediment build up among tank walls or mineral blockage from inside connecting pipes. There may also be different types of debris that get carried by the water and can be stuck inside the tanks. Now, if the materials are foreign, then there is no telling the kind of damage they can bring. True, there is a chance that the material might not be harmful at all but if there is an off chance that this can cripple the unit, then it needs to be eliminated at all costs. Being on point about this practice will help homeowners a great deal in keeping the system well-functioning.

  1. Check the Anode Rod Once Every Three Years

Anode rods inside the tank are disposable parts of it that, in a way, acts as a sacrificial rod to protect the tank interior and other fixtures inside it and submerged in the water to stay untouched by rust and sediment buildup. The anode rod attracts sediments and other corrosive factors, attaches them to its body to prevent other parts from corrosion. Because of this, anode rods get corroded on a regular basis. That is why it is imperative to have the rod checked and replaced as often as needed. A sign that it needs replacing is when the body is almost completely covered in minerals and sediments or when there are at least 15 inches of steel wire exposed.  

  1. Inspect T&P Valve for Damage

The main purpose of this item is to act as a control device. This will be responsible for releasing over-insulated water inside the tank, making space for replacements, and therefore bringing the temperature back down to a safe level. This device can be damaged due to extremely high temperature and overbearing pressure. To test its functions, pull the lever above the relief valve and quick release. Water is expected to come out of the valve and the unit is perfectly fine. However, if there is none, then the unit needs a replacement.

  1. Install Water Heater Expansion Tank

For proper set-up, have your neighbouring professional plumbing service, provider. Remember that a water tank can only handle too much water. If the volume exceeds the acceptable amount of water the heater can insulate, the unit will be forced to work twice as hard. If this happens, the water heater will be long damaged before its intended life guarantee is over. Having a water heater expansion tank can shoulder the excess water so the water heater can take up more space for heating.